Alternative to Clipping for DM/WB/CR/SILH Users

On June 25, I posted about a feature in KNK Studio which allows you to fill letters with a pattern for a print and cut. Thanks to some posters at the UK Scrappers board, I determined that you can use Microsoft Word to also fill letters with a fill/texture and then import that image for auto-tracing in Design Master and in RoboMaster or Wishblade 3.0. Here is an example of such as image:


And the link to watch the video showing the creation of this title is at:

Alternative to Clipping

Granted you can do this in a lot of other programs: Photoshop, PSP, Elements, etc, but I was happy to see an alternative that’s already installed on so many more computers. 🙂

Keep your blades short! :-)

A HUGE thanks to Lynn B for emailing me and pointing out that when you go to my profile and check out my interests (and the first three were cutting, cutting, cutting), they were all LINKS that took you to blogs where people were into… well… stuff that none of US would want to look at! Yikes! But I think I fixed it! I got rid of my “cutting, cutting, cutting” words. And surely my interest in cardmaking, scrapbooking, and mathematical puzzles won’t lead any of you to bondage sites? lol

So… let’s get to a tip of the… weekend? I can’t commit to frequency… lol These free tips/videos/tutorials will always be based on inspiration and not the calendar! 🙂

Don’t expect your blades to always be the same length! Heck… don’t expect your bladeholders to be identical. And that’s okay. With the KNK system, you simply back off or increase the blade length, as needed, to match the thickness of your cutting material. With the WB/CR/SIL replacement blades, check carefully when you install a new one and just assume you might need one LOWER colored blade cap than usual. If you previously needed the pink cap to cut your favorite cardstock, then you might find you need the yellow one now.

As I always preach at the Yahoo groups and to my WB/CR/Sil students, more blade never equals better cutting, so the KNK owners shouldn’t be extending that blade out all the way and, for the WB/CR/Sil owners, don’t ever think that the pink cap is the key to perfect cutting for ALL materials. Nope… that’s just not right! I even found the other day that I could easily cut Sam’s Club white cardstock with the blue cap on my Craft ROBO! This is something that I would NEVER have even thought to test a few years ago. My guidelines were always what was being said at the Yahoo groups and I would read posts from these super-confident, supposedly expert cutter owners who would post such absurd comments as, “I ALWAYS cut all materials with the the pink cap” or “I always cut using the fastest speed but no O Rings.” Those comments are really sad because, unless you ALWAYS cut the exact same material, then you are just WRONG about using the same settings every time.

So, get that blade length just right so you aren’t using the most important part of the blade to etch your designs into your mat, and you’ll find that you get much better cutting. And if your blade tip isn’t cutting into the mat, then you can use more pressure or even multi-pass cutting and not worry about damaging that blade. Instead, you’ll be getting better cutting and that’s what it’s all about! 🙂