The next few posts here will all be updates to previous posts based on receiving new information from different guys reading my blog. Thus, this is called my Thanks, Guys Series.

On October 2, I presented a video on converting a single line stick figure into a cuttable object and on October 14, I presented a video on how to design your own spider web. In both of these videos I used Transform>Round Corner to convert single lines in a drawing to 2D images that can be welded and cut.

A guy at CADLink contacted Chad at Accugraphic to let him know that there was a faster way to achieve the same results I was showing in those two videos. You use the Line Style window to create a Thick Style attribute, apply a Make Path and then a Basic Weld.

Spider Web Part 2

Two things I forgot to include in the video: Go to View and make sure Show Line Style is checked. Now this isn’t critical to the success of the method but without Show Line Style turned on, when you leave the Line Style window, your images will appear as thin lines again and you will think you did something wrong. Of course, it’s kind of fun to actually leave Show Line Style turned off and then go ahead and perform the Make Path and Basic Weld and watch your single line image turn into a thick welded object right before your eyes!

The other thing I forgot to mention in the video is that you have a choice in how your lines appear. There won’t be a big difference in the appearance but definitely try clicking on the End Cap choices and also the Sharp vs Rounded vs Mitered choices to view the effects on your image. The following screen shot shows the location of these settings in the Line Style window:

So, this is definitely an excellent alternative to using Round Corner, especially when you have closed paths in your images. Check in soon for the next post in the “Thanks, Guys! Series. ”