Page 12 - Klic-N-Kut User Manual

Dwell
0 to 5 seconds
Dwell will delay the start of the
cut. This is used in special
applications, such as
engraving with a rotary tool.
Step 7: In Online Mode, Use the left and right arrow
press the Menu button again keys to set the Dwell from 0 to
(after pressing it in Step 6) to 5 seconds.
display Dwell.

Soft Landing
Yes or No

Soft Landing affects the force
Step 8: In Online Mode, press
the Menu button again (after used when the blade drops to
pressing it in Step 7) to display begin the cut. For some
the Soft Landing setting. materials, you may need to turn
this setting off to increase the
downward impact. Use the right
Press Menu again to return to
the same display as shown in arrow to toggle the setting.
Step 1.

Pause Display

v = cutting velocity, mm/sec (1 – 800)
f = cutting force (scale d from 1 to 255)

Use the “+” and “-“ buttons to change
the cutting velocity or cutting force
Step 9: Press the Pause and press Pause again to resume
button during a cut and the the cut.
cutter will immediately stop …OR…
cutting. Turn off the cutter to abort a cut.

Offline Mode Functions

Offline Mode Display
x = forward/back distance from origin
y = left/right distance from origin Press the Origin button to set
the origin for cutting.
Step 10: Press the Online
button.
Move the mat
This will change to Offline forward or towards
mode. Experiment with “+”, the back
“-“,Test, and Origin
buttons as shown.

Move the blade
carriage left or right

12