Page 11 - Klic-N-Kut User Manual

Online Mode: Repeat

Step 3: In Online Mode, This feature can be used to check
press the Repeat button. the positioning of a tool or pen
inserted into the blade holder seat.
The blade holder seat will
drop. Press the Repeat In Offline mode, the Repeat button
button again and the blade repeats the last cut. Refer to the
holder seat will rise. Offline Mode displays..

Setting Display
Us = Traverse/Up speed (movement of carriage
when head is up)
BR = Baud Rate (Bluetooth: 38400; USB: 38400;
Serial: 9600)

Step 4: In Online Mode, press
the Menu button. Increases/Decreases
Traverse Velocity (Up
Experiment with the “+” and “-“ Speed). Set to 200 if doing
buttons for the Traverse PNC applications
Speed. Change the Baud Rate
based on the connection you
are using. Increases/Decreases Baud
Rate: Bluetooth, USB: 38400
Serial: 9600

Set Per Display
Xp = Calibration of X scale
Yp = Calibration of Y scale

Do not change these values.
Step 5: In Online Mode, Instead, the calibration of
press the Menu button again your KNK can be done from
(after pressing it in Step 4.) within the software. Refer to
Section 2.10.

Blue Tooth
Bluetooth Open?
Bluetooth Close?

To enable the cutter to be a
Step 6: In Online Mode, Bluetooth device, press the
press the Menu button again right “-“ button. The display will
(after pressing it in Step 5) to change to Bluetooth Close?
display the Bluetooth and will now be ready to be
setting. recognized by your computer.

11