Page 25 - Klic-N-Kut User Manual

 Check your blade holder, as needed. If suddenly you cannot get a clean cut, check the blade holder for any
tiny slivers of material that may have been caught up by the blade and fed up inside the blade holder.
 The pinch wheels on the Maxx Air may need to be re-centered under the white rectangles. If you are
suddenly experiencing skewing or incorrectly cut shapes, check to see if one or more pinch wheels might
have shifted away from the centers of the white rectangles. Lift the lever(s) and slide the pinch wheel(s)
back into position.
 If you move your cutter frequently or it gets jolted, it is possible for the laser to shift slightly. Periodically, you
may want to do a check of the print and cut accuracy to make sure the calibration is still precise. Refer to
Chapter 9, if you plan to be using your Klic-N-Kut for print and cut applications.
 If you cut vinyl or other backed materials regularly, you may need to replace the cutting strip at some point.
You will be able to tell based on seeing deep cuts in the strip and an inconsistency in the cutting. Contact
KNK USA for information on obtaining a replacement.
 For any other questions or concerns about maintaining your KNK, please post at our user forum:
http://knkusa.com/forums/

25