Page 207 - Klic-N-Kut User Manual

 The next step is to move the laser dot so that it is precisely at the corner of the printed registration mark.
Use the arrow keys in the software or use the arrow keys on your keyboard. You will notice that the intensity
of the laser light will change when it is on top of the printed black lines. This can be very useful! When the
laser light is precisely on the printed dot, click on the center target button on the screen (or press the Enter
key on your keyboard).
 The laser/pin will move to the vicinity of the next registration mark and the flashing red light in the software
moves to the same relative point:

This dot will now be flashing red

Again, click on these arrows or your
keyboard arrows until laser/pin is on the
reg mark corner.

Once the light/pin is centered on
the reg mark dot, click on Next.

 Repeat the process with the final reg mark:

This dot will now
be flashing red

Again, click on these arrows or your keyboard
arrows until laser/pin is on the reg mark
corner.

Once the light/pin is centered on the reg
mark dot, click here or press Enter on your
keyboard.

 After completing the third reg mark, the following window will open and remind you to wait until the laser
light/pin has returned to the origin before pressing OK.

207