Page 8 - ACS 24-UHF Eagle with MTC User Manual
P. 8
o DO NOT shake the cutter while it is operating.
o DO NOT cut any materials that have staples or other embellishments attached.
o DO NOT touch the cutter with a magnet.
o DO NOT allow small items to fall into the cutter.
o TURN OFF the cutter when not in use.
1.04 Parts Diagram
Blade Carriage
Blade Holder Seat
Pinch Wheel
Positioning Label:
Total of 5
Cutting Strip
Grit Shaft (beneath
Pinch Wheels):
Total of 5
Pinch Wheel: Front Bolt-On Front Table
Total of 4 Control Panel (built
into top on some
models)
USB Port
Power Port
RS232 Serial
Port
Left Side Right Side
On/Off Switch
Pinch Wheel Lever:
Total of 4
Bolt-On Back Table
Back
8