Page 44 - Klic-N-Kut User Manual

# of Blade
Material Type Material Brand or Source Blade Force Speed Other Comments
Passes Ht*
Rhinestone Template Sticky Flock Red 45-60 500 1 25 Remove liner and brayer sticky side to a sticky
Material mat for easier weeding.
Try cutting twice versus multi-cut of 2 passes…
Rubber Gasket 1/16" thick Blue 150 25 2 13
seems to work better on sharp corners.
Shrink Film Grafix - clear Red 170-190 300 1 25 Taped to mat

Shrinky Dink Frosted Ruff N' Ready Red 170-190 300 1 25 Taped to mat
Used the special mat sold by Silhouette for cutting
Stamp Material Clear rubber sold by Silhouette Red 20 75 1 25
their stamp mat'l
Side with clear sheet down and tape to mat. Also
Stencil Plastic Show-Offs Red 195 80 1 25
use F = 130 / 2 passes
Styrene Lowe's sign dept (pink and green) Red 140-160 50 2 25 Taped to Mat

Styrene www.knkusa.com, white, ~0.02" Red 120-140 50 2 25 Taped to Mat

Styrene 0.005", white Red 75 50 1 25 Taped to Mat

Styrene 0.01", white Red 115 50 1 25 Taped to Mat

Styrene 0.015", white Red 120-130 50 2 25 Taped to Mat

Vellum Heavy Red 60-75 400 1 25

Vellum - thin WorldWin Colormates Red 15-25 400 1 25

Vinyl knkusa.com Red 5-15 300 1 25 With no mat, blade holder rests on rim

Window Sheets Stampin Up - #114323 Red 150-170 300 1 25 Taped to Mat

Wood Veneer 0.015" from cardsofwood.com Red 115 - 125 100 2 25 Walnut and oak were tested; taped to mat

Very sticky mat and taped down due to wood
Wood Veneer 0.035" thick Red 200 50 4 13
curling
Very sticky mat and taped down due to wood
Wood Veneer 0.022" thick Red 160 150 2 25
curling
Wool: 100% w/ freezer paper applied Yellow 140-160 100 3 13 Taped to mat

* Number of Post-It notes used to set blade tip distance from material
IMPORTANT: These settings should be used for the initial test cut. Adjustments may be necessary based on the
condition of the blade, variations in the material, humidity, condition of the cutting mat, blade tip height, etc.
1
© 2009- 2014 Sandy McCauley, All Rights Reserved

44