[version]
$Revision: 3 $
$Date: 7/11/07 3:57p $

[setup]
plottername=Silhouette 
manufacturer=QuicKutz
page=8269,11694,508
scale=508,508,508
; do not modify defscale line as it is used by RESET button
defscale=508,508,508
; string containing resolutions the plotter is capable of
MultiRes=508,1016,2540
; default to 1st resolution , 0=1st, 1=2nd
ResSel=0
HPGL=0
******PageX,PageY,Resolution
notes=For USB operation, ensure Port Location is External DLL. Make sure to set the Tool option to Pen with reg marks or Knife with reg marks if Registration Marks are being used on screen. If no Registration Marks are enabled on screen, then set the Tool option to Knife or Pen. 
cut=1,0,0,0,0,0,1,0,0,0,0,369,374,0,0,0,0,0,0,0,10,0,0,0
tile=0,0,0,0,0,0,0,0
move1=1,6,9,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,6
move2=1,6,1,18,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
move3=1,6,17,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
move4=1,6,1,18,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
moveLimit1=0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
moveLimit2=2,30,100,32,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
MaxVector=31000
Forced Jog=TRUE
generic=0
driver=grcrobo
XYMoveAbs=1
;do not enable arc support in GPGL drivers
ArcAbs=0
ArcSupport=0
;YMOVE AFTER TILING=1
DeviceLimits=8269,11694,1000
MachineIdNum=-1
SkipFileDialog=0
fnamecounter=1
;removes margins from cut data
MoveBack4regandmargin=CIN_COUT
InternalRegmarks=2,0,0
regmarksdisallowed=0,1,0,1,1,0,1,1,0,1,0,0,0,0,0,0,0,0,0,0,1,1,1,1,0,0,0,0,0,0
cbccounter=1
CutByColor=0
UseDriverCopies=0
;do not change or remove as line is needed for regmarks
Plottertype=2
// 1=send to cutter and have it do the math
regflag=1  
// defaults to 4 if line doesnt exist, cutter will search for 4 marks
nummarks=4;
setupplot=1,1
Origin=1
MaterialPosition=0
MaterialOrientation=0
XAdj=0
YAdj=0
EndXMove=0
bufferzone=0
OrigAdj=1
Landscape=0
// none,1pta,man,opos,mutoh,cornout,2pta,3pta,cornin,useprint,

[MoveControl]
Variables=4
V1=Cutting velocity,1.0cm/s ,1,36,!%d
V2=Acceleration, ,1,6,*%d,~
V3=Pressure, ,1,31,%d
V4=Blade offset,deg,1,31,FC%d,
velocityvar=-1
velocityupvar=0
accelvar=-2
accel2var=0
pressurevar=-3
bladeoffsetvar=4
;RegmarkMethod=1

[Interrogation]
;HardClip=U,1000,20,13,%ld,%ld
;CurrentPos=G,1000,20,13,%ld,%ld,%*ld
;Digitize=~~
;CurrentPos=OD;DC;,500,30,13,%ld,%ld,%*ld
;ThreePointDistance=TB;,200,30,13,%ld,%ld,%*ld]
;////////////////////////////////////////////////////////////
;ThreePoints=TB33?0?0;,50000,50,13,%ld,%ld,%ld,%ld,%ld,%ld]
;Num3PPre=0
;Num3PPost=0
;ThreePPre1=TB99,
;ThreePPost1=TB99,
;//////////////////////////////////////////////////////////
;pterm=1
;wait=1
;PlotterStatus=OZ;
;searchports=0
;ExpectedId=7586,7550
;IDPrompt=Please make sure the cutter is connected to the PC and that the light on the keypad is green.\r\nPress the Set Origin button on the keypad if the light is red." 

[Generic]
MoveUp=M%.0lf,%.0lf
MoveDn=D%.0lf,%.0lf
;Tile= is handles in the Tools section as Tool3 must have No Tile=
Tile=
AbsArc=AA%.0lf,%.0lf,%.2lf,1
RelArc=AR%.0lf,%.0lf,%.2lf,1
;Pause=NR
EndJob=SO
StartJob=&100,100,100,^0,0,\0,0,
Term=,\r\n


[Tool1]
Variables=3
ToolInit=FC0
ToolEnd=
velocityvar=-1
accelvar=-2
pressurevar=-3
bladeoffsetvar=-3

[Tool2]
Variables=4
ToolInit=
ToolEnd=
velocityvar=-1
accelvar=-2
pressurevar=-3
bladeoffsetvar=4

[Tool3]
Variables=3
ToolInit=FC0
ToolEnd=
velocityvar=-1
accelvar=-2
pressurevar=0
bladeoffsetvar=-3

[Tool4]
Variables=4
ToolInit=
ToolEnd=
velocityvar=-1
accelvar=-2
pressurevar=-3
bladeoffsetvar=4

[TOOLS]
Number Of Tools=4
Tool 1 Name=Pen
Tool 1 Type=1
Tool 2 Name=Knife
Tool 2 Type=0
Tool 3 Name=Pen with reg marks
Tool 3 Type=1
Tool 4 Name=Knife with reg marks
Tool 4 Type=0
Number Of Selected Tool=1
Tool 1 Check Boxes Data=0,0,0,0,0,0,0,0
Tool 3 Check Boxes Data=0,0,0,0,0,0,0,0
Tool 2 Check Boxes Data=0,0,0,0,0,0,0,0
Tool 4 Check Boxes Data=0,0,0,0,0,0,0,0

[Resolution]
;Low=1
;Med=5
;High=25
;CutResBase=.0254
;ArcFitRes=.0254

[RegMarks]
RemoveFromCutList=1

[Port Setup]
;commset=9600,n,8,1,p
;Use DOS Device=1
;TXThreshold=10000
;TransmitBufSize=10000
;ReceiveBufSize=1024
;handshaking=0,0,0,0,0,0,0,1,1,17,19,100,900,0,0
;ReportError=0xFFFF
CommFunction=7
Use DOS Device=0
Port=External DLL
PortType=9
Spool=0
Commset=9600,n,8,1,p
Path=
File Name=
Extension=
qfullname=
HotFolder=
qport=-1
qname=
BufData=1
TXLumps=

[CraftRobo Reg Marks]
UsingRegMarks=0
OriginX=0.
HDist=0.
VDist=0.
Width=0.
Height=0.
OriginY=0.

[Control]
ControlID=14
ControlCheck=16184