[version]
$Revision: 18 $
$Date: 29/09/08 11:26a $

[setup]
plottername=Graphtec CE5000-40 CRP
manufacturer=Graphtec
family=FC70008000G
page=1968000,14700,254
scale=254,254,254
; do not modify defscale line as it is used by RESET button
defscale=254,254,254
; string containing resolutions the plotter is capable of
MultiRes=254,1016,508,2540
; default to 1st resolution , 0=1st, 1=2nd
ResSel=0
HPGL=0
******PageX,PageY,Resolution
notes=For USB operation, ensure Port Location is External DLL.This driver supports Type 1 and 2 Automatic and Type 1 and 2 segemented regestration marks. This driver also supports Graphtecs array copy function with Type 1 and 2 automatic regmarks via DECALs button in Print and Cut. This cutter ships at a resolution of .1mm/step. For best results, set the cutter to 0.025mm/set and this driver to 1016 steps per inch.  
cut=0,0,0,0,0,0,1,0,0,0,0,369,372,0,0,0,0,0,0,0,10,0,0,0
tile=0,0,0,0,0,0,0,0
move1=10,0,4,5,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
move2=10,0,4,5,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
move3=10,0,4,5,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
move4=10,0,4,5,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
moveLimit1=1,0,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
moveLimit2=60,100,6,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
HCmoveLimit1=1,0,0,0,0,0,0
HCmoveLimit2=15,0,0,0,0,0,0
HCmove1=2,197,5,5,0,0
HCmove2=15,0,0,0,0,0
HCmove3=15,0,0,0,0,0
HCmove4=15,0,0,0,0,0
MaxVector=31000
Forced Jog=TRUE
generic=0
driver=gpglusb
XYMoveAbs=1
;do not enable arc support in GPGL drivers
ArcAbs=0
ArcSupport=0
;YMOVE AFTER TILING=1
DeviceLimits=1968000,14700,1000
MachineIdNum=-1
SkipFileDialog=0
fnamecounter=1
;removes margins from cut data
MoveBack4regandmargin=CIN_COUT
InternalRegmarks=2,0,0
regmarksdisallowed=0,1,0,1,1,0,1,1,0,1,0,0,0,0,0,0,0,0,0,0,1,1,1,1,0,0,0,0,0,0
cbccounter=1
CutByColor=0
UseDriverCopies=0
OrigAdj=1
;do not change or remove as line is needed for regmarks
Plottertype=2
// 1=send to cutter and have it do the math
regflag=1  
// defaults to 4 if line doesnt exist, cutter will search for 4 marks
nummarks=4;
// none,1pta,man,opos,mutoh,cornout,2pta,3pta,cornin,useprint,

[MoveControl]
Variables=4
V1=Cutting velocity,val,1,60,!%d
V2=Blade offset,val ,0,100,FC%d
V3=Acceleration,val ,1,6,*%d,~
V4=Pressure,val ,1,31,%d
velocityvar=-1
velocityupvar=0
accelvar=-3
accel2var=0
pressurevar=-4
bladeoffsetvar=-2
;RegmarkMethod=1

[HCMoveControl]
HC=1
Variables=2
V1=Tab,.01in,1,1500,~
V2=Gap Between Tabs,.01in,1,1500,~
V3=Gap Pressure,grams,0,100,*3,%d
V4=Tab Pressure,grams,0,100,*3,%d
V5=Gap Velocity,1.0cm/s,1,36,VS%d
V6=Tab Velocity,1.0cm/s,1,36,VS%d
Method=3
PenHighPressure=6
PenLowPressure=1
AddTabAtStart=0
HCPause=0


[Interrogation]
;HardClip=U,1000,20,13,%ld,%ld
;CurrentPos=G,1000,20,13,%ld,%ld,%*ld
;Digitize=DP;
;CurrentPos=OD;DC;,500,30,13,%ld,%ld,%*ld
;ThreePointDistance=TB;,200,30,13,%ld,%ld,%*ld]
;////////////////////////////////////////////////////////////
ThreePoints=TB33?0?0;,50000,50,13,%ld,%ld,%ld,%ld,%ld,%ld]
Num3PPre=0
Num3PPost=0
ThreePPre1=TB99,
ThreePPost1=TB99,
;//////////////////////////////////////////////////////////
pterm=1
wait=1
PlotterStatus=OZ;
searchports=0
ExpectedId=7586,7550
IDPrompt=Please make sure the cutter is connected to the PC and that the light on the keypad is green.\r\nPress the Set Origin button on the keypad if the light is red." 

[Generic]
MoveUp=M%.0lf,%.0lf
MoveDn=D%.0lf,%.0lf
;Tile= is handles in the Tools section as Tool3 must have No Tile=
Tile=
AbsArc=AA%.0lf,%.0lf,%.2lf,1
RelArc=AR%.0lf,%.0lf,%.2lf,1
;Pause=NR
EndJob=SO
StartJob=&100,100,100,^0,0,\0,0,
Term=,\r\n


[Tool1]
notes= You must either enable or disable both acceleration and pressure. You cannot have one on and one off
ToolInit=
ToolEnd=
Tile=SO
velocityvar=-1
accelvar=-2
pressurevar=-4
bladeoffsetvar=-3

[Tool2]
notes= You must either enable or disable both acceleration and pressure. You cannot have one on and one off
ToolInit=
Tile=SO
ToolEnd=

[Tool3]
notes= You must either enable or disable both acceleration and pressure. You cannot have one on and one off
ToolInit=
ToolEnd=
velocityvar=-1
accelvar=-2
pressurevar=-4
bladeoffsetvar=-3

[Tool4]
notes= You must either enable or disable both acceleration and pressure. You cannot have one on and one off
ToolInit=
Tile=SO
ToolEnd=

[TOOLS]
Number Of Tools=4
Tool 1 Name=Setting 1
Tool 1 Type=1
Tool 2 Name=Setting 2
Tool 2 Type=1
Tool 3 Name=Reg Mark Tool
Tool 3 Type=1
Tool 4 Name=Setting 4
Tool 4 Type=1
Number Of Selected Tool=1
Tool 1 Check Boxes Data=0,0,0,0,0,0,0,0

[Resolution]
;Low=1
;Med=5
;High=25
;CutResBase=.0254
;ArcFitRes=.0254

[Port Setup]
;commset=9600,n,8,1,p
;Use DOS Device=1
;TXThreshold=10000
;TransmitBufSize=10000
;ReceiveBufSize=1024
;handshaking=0,0,0,0,0,0,0,1,1,17,19,100,900,0,0
;ReportError=0xFFFF
CommFunction=7
Use DOS Device=0
Port=COM1:
PortType=0
Spool=0
BufData=1
TXLumps=
Commset=9600,n,8,1,p