Comments on: Classes http://www.iloveknk.com Let me teach you to LOVE your cutter! Thu, 09 Feb 2012 18:23:06 +0000 hourly 1 http://wordpress.org/?v=3.3.1 By: Sandy McCauley http://www.iloveknk.com/products-page-2/classes/comment-page-1/#comment-56879 Sandy McCauley Thu, 06 Oct 2011 15:47:02 +0000 http://www.iloveknk.com/classes/#comment-56879 I'm so glad you brought this up! Yes... I do need to add that and will do it now. I very much will teach MTC classes now that I feel very comfortable with the software. I'll make it available now, but you can go ahead and buy a class and we can cover whatever you need to learn. I’m so glad you brought this up! Yes… I do need to add that and will do it now. I very much will teach MTC classes now that I feel very comfortable with the software.

I’ll make it available now, but you can go ahead and buy a class and we can cover whatever you need to learn.

]]> By: traci http://www.iloveknk.com/products-page-2/classes/comment-page-1/#comment-56866 traci Thu, 06 Oct 2011 14:28:59 +0000 http://www.iloveknk.com/classes/#comment-56866 I need help! I have KNK Maxx and moved it to a different computer but downloaded MTC. I can't seems to cut anything. do you teach private classes for MTC? that wasn't on the pull down menu for software when I was going to sign up and pay for a class. I need help! I have KNK Maxx and moved it to a different computer but downloaded MTC. I can’t seems to cut anything. do you teach private classes for MTC? that wasn’t on the pull down menu for software when I was going to sign up and pay for a class.

]]> By: Sandy McCauley http://www.iloveknk.com/products-page-2/classes/comment-page-1/#comment-52728 Sandy McCauley Tue, 13 Sep 2011 04:02:15 +0000 http://www.iloveknk.com/classes/#comment-52728 Hi Denise, The outside and interior cuts are definitely workable. The debossing is possible... will depend on the paper itself. I'll email me privately Hi Denise,

The outside and interior cuts are definitely workable. The debossing is possible… will depend on the paper itself. I’ll email me privately

]]> By: Denise Lene http://www.iloveknk.com/products-page-2/classes/comment-page-1/#comment-52681 Denise Lene Mon, 12 Sep 2011 22:01:39 +0000 http://www.iloveknk.com/classes/#comment-52681 Hi Sandy- Hopefully this will seem so simple to you! I need a machine that will cut a rectangular piece of paper with a rectangular opening in the center. Dimensions are approximately 60mm x 55mm for the exterior dimension and 30mm x 25mm for the interior cut. Additionally-and ideally-the machine would deboss around the interior cut. If your machines that you speak so highly of can do this (even without the debossing) I would buy one today. Could you please email me a response to see if we need to have a further conversation or feel free to call: 203.834.1984 Looking forward to doing business with you. Regards, Denise Hi Sandy-

Hopefully this will seem so simple to you! I need a machine that will cut a rectangular piece of paper with a rectangular opening in the center. Dimensions are approximately 60mm x 55mm for the exterior dimension and 30mm x 25mm for the interior cut.

Additionally-and ideally-the machine would deboss around the interior cut.

If your machines that you speak so highly of can do this (even without the debossing) I would buy one today. Could you please email me a response to see if we need to have a further conversation or feel free to call: 203.834.1984

Looking forward to doing business with you.
Regards,
Denise

]]> By: Sandy McCauley http://www.iloveknk.com/products-page-2/classes/comment-page-1/#comment-52147 Sandy McCauley Fri, 09 Sep 2011 16:12:19 +0000 http://www.iloveknk.com/classes/#comment-52147 I have another web site: http://www.ilovecraftrobo.com/ where you will find the written class tutorials on using RoboMaster. I taught these at a local store years ago, and they should help you a lot! Note that Make The Cut will cut to your Craft Robo and you might want to consider adding it because it has SO many great designing features missing in RoboMaster... plus more to come! RoboMaster is basically finished in terms of advancement. MTC is much newer! Plus you get access to over 4000 cutting files from their online gallery, as well as the extra functions. I sell it in my Shop above and will be writing the user manual for it, plus making lots of videos. : ) I have another web site: http://www.ilovecraftrobo.com/ where you will find the written class tutorials on using RoboMaster. I taught these at a local store years ago, and they should help you a lot!

Note that Make The Cut will cut to your Craft Robo and you might want to consider adding it because it has SO many great designing features missing in RoboMaster… plus more to come! RoboMaster is basically finished in terms of advancement. MTC is much newer! Plus you get access to over 4000 cutting files from their online gallery, as well as the extra functions. I sell it in my Shop above and will be writing the user manual for it, plus making lots of videos. : )

]]> By: Debbie Pamment http://www.iloveknk.com/products-page-2/classes/comment-page-1/#comment-52062 Debbie Pamment Fri, 09 Sep 2011 02:38:52 +0000 http://www.iloveknk.com/classes/#comment-52062 Hi Sandy, I bought an older version of the Craft Robo and am looking for some help learning more about it but I live in Australia so a phone class may be a bit difficult. Do you offer any internet classes or have any tutorials that may help me??? I have the robomaster software and have tried some very basic designs which I was happy wirth using the grids - but would love to learn more! Thanx Debbie xXx Hi Sandy,
I bought an older version of the Craft Robo and am looking for some help learning more about it but I live in Australia so a phone class may be a bit difficult. Do you offer any internet classes or have any tutorials that may help me??? I have the robomaster software and have tried some very basic designs which I was happy wirth using the grids – but would love to learn more!
Thanx Debbie
xXx

]]> By: Greg Smith http://www.iloveknk.com/products-page-2/classes/comment-page-1/#comment-50652 Greg Smith Thu, 01 Sep 2011 12:57:59 +0000 http://www.iloveknk.com/classes/#comment-50652 Sandy, I look forward to my first class! Can you respond to my email address? I could not find yours on this site and I thought I could remember it when you told while I was driving...not. Looking forward to Wednesday September 7 @ noon EST. YAY! Greg Sandy,
I look forward to my first class! Can you respond to my email address? I could not find yours on this site and I thought I could remember it when you told while I was driving…not.
Looking forward to Wednesday September 7 @ noon EST. YAY!
Greg

]]> By: Sandy McCauley http://www.iloveknk.com/products-page-2/classes/comment-page-1/#comment-44909 Sandy McCauley Tue, 26 Jul 2011 16:26:20 +0000 http://www.iloveknk.com/classes/#comment-44909 Sorry Ali, I don't support Photoshop or Illustrator... and neither one is well suited for rhinestone design. You actually want something like KNK Studio or Make The Cut or possibly another program. Which cutter do you own? Sorry Ali, I don’t support Photoshop or Illustrator… and neither one is well suited for rhinestone design. You actually want something like KNK Studio or Make The Cut or possibly another program.

Which cutter do you own?

]]> By: Ali Meneses http://www.iloveknk.com/products-page-2/classes/comment-page-1/#comment-44907 Ali Meneses Tue, 26 Jul 2011 16:20:03 +0000 http://www.iloveknk.com/classes/#comment-44907 Hello Sandy, I need help in learning to design rhinestone templates in Photoshop or Illustrator. Currently I am making the dots one by one, but it is to time consuming. Can we schedule a class? Thanks, Ali Hello Sandy,

I need help in learning to design rhinestone templates in Photoshop or Illustrator. Currently I am making the dots one by one, but it is to time consuming. Can we schedule a class?

Thanks,
Ali

]]> By: Sandy McCauley http://www.iloveknk.com/products-page-2/classes/comment-page-1/#comment-13195 Sandy McCauley Fri, 12 Nov 2010 16:33:21 +0000 http://www.iloveknk.com/classes/#comment-13195 Ah! So sorry for misunderstanding! You want a class on print and cut! This is covered in Section 4.7 of the User Manual, but I also have a Print and Cut video class you can order for $14.99. It has 7 different videos which take you step-by-step through the calibration and print & cut processes and some extra information on perfecting your print and cut. It's a better deal than buying a 90 minute phone class since the videos actually show me performing a print and cut and seeing it is the key to fully understanding the method. Also, you can send me emails if you have additional questions after viewing the videos. If you are interested, email me and I'll send you a Paypal invoice! I need to get this listed in my store, but haven't had a chance. Ah! So sorry for misunderstanding! You want a class on print and cut!

This is covered in Section 4.7 of the User Manual, but I also have a Print and Cut video class you can order for $14.99. It has 7 different videos which take you step-by-step through the calibration and print & cut processes and some extra information on perfecting your print and cut. It’s a better deal than buying a 90 minute phone class since the videos actually show me performing a print and cut and seeing it is the key to fully understanding the method. Also, you can send me emails if you have additional questions after viewing the videos.

If you are interested, email me and I’ll send you a Paypal invoice! I need to get this listed in my store, but haven’t had a chance.

]]>